Ogas Crystal Clear Restorer

This is a dedicated automotive oil film remover designed to clear the stubborn residue that regular glass cleaners can’t touch. It dissolves road grime, oily traffic film, wax build-up, and water spots to restore a clean, streak-free windshield. The formula is glass-safe when used as directed and is intended only for exterior automotive glass including windshields, side windows, and mirrors.

1. Wash the glass first
   
   Rinse the windshield and windows with water and a basic car shampoo or cleaner. Remove loose dust and dirt so you are only dealing with the film.
   
   
2. Dry the surface
   
   Use a clean microfiber towel to dry the glass. The surface should be cool to the touch, not hot from the sun.
   
   
3. Shake the bottle well
   
   Mix the formula properly so it works at full strength.
   
   
4. Apply a small amount t
   
   Pour the product directly on the glass and start rubbing in circular motion
   
   
5. Work in small sections
   
   Pick a section of the windshield. Rub the product onto the glass in straight or circular motions with firm, even pressure. You should feel it “cutting” through the film.
   
   
6. Let it sit briefly
   
   Give it a short contact time so it can break down the oil film and residue. Do not let it dry into a hard crust.
   
   
7. Wipe off the residue
   
   Use a clean, dry microfiber towel to wipe away the product and dissolved film. Flip the towel often so you are not smearing it back on.
   
   
8. Inspect from different angles
   
   Check the glass from inside and outside and from side angles. If you still see haze or streaks, repeat step 5–7 on those spots.
   
   
9. Finish with a light glass wipe (optional)
   
   If needed, do a quick final wipe with plain water or a basic glass cleaner to remove any last traces and get a perfectly clear finish.
   
   
10. Repeat on all exterior glass
    
    Use the same method on side windows and mirrors. Do not use on plastic lenses or tinted film.

This formula uses a patented Micro-Solv Film Breakdown Technology, powered by three active ingredients that target oil film at the molecular level.

Key Ingredients (Proprietary Blend)

• Oleaclear-7X
A precision solvent that loosens the bond between oily traffic film and glass so the residue lifts instead of smearing.

• GlareCut Micron Agents
Micro-particle surfactants that break apart wax buildup, water spots, and stubborn road film that regular cleaners can’t touch.

• HydraStrip Complex
A fast-acting blend that penetrates road grime, dissolves washer-fluid residue, and clears haze within seconds.

Together, these compounds dissolve and lift the film off the surface. When you wipe, the suspended residue leaves the glass clean, sharp, and streak free.
This technology doesn't mask the haze. It breaks it down at the source to restore real clarity and reduce night-time glare.